32
Shutter
Press
and hold
‘Mute’ on the theater master remote for two seconds to toggle the internal
mechanical shutter blade closed or open with a single keystroke. Alternatively, press
Mute to toggle from the present on/off state. A closed shutter blanks the display (turns
it to black). Close the shutter to mute all display while maintaining access to projector
functions. Opening the shutter restores the image.
NOTES:
1)
“Sh” appears in the LED display when the shutter is closed.
2)
The shutter is
open upon power-up.
Function Key (“Dis”)
IF WITHIN A MENU:
Using the Func for special tasks within the menu system is noted
with the appropriate topic elsewhere in
Section 3
. For example, press Func in the Channel
Setup menu to enable deletion or copying of a channel.
IF WITHIN A PRESENTATION:
Press Func (or ‘Dis’ key in the remote) followed by a 2-
digit number to enable a specific color or colors in the display
(see right). For example, 6 4 Func will display only red and
green data, 6 7 Func will display all color data. Eliminating
one or more colors can help with certain diagnostics and
setups, such as when accurately overlaying one image on
top of another from stacked projectors.
NOTE: Color enabling can also be implemented from
numerous locations within the menu system.
Section 3: Operation
Section 3: Operation
Input 6
Press Input 6 to display from the
INPUT 6
interface module installed in the Option 2 slot.
NOTE: If you have the optional
Dual SD/HD-SDI Module
installed and there are two inputs
connected here, the second input (B) is considered
INPUT 8
. If you are using the built-in
keypad or the remote keypad, press
INPUT 6
to access
INPUT 8
as follows:
• While displaying from
INPUT 6
, press Input 5 again. This switches to
INPUT 8
.
• While displaying from any input other than the Dual SD/HD-SDI Module, press
Input 5 . This switches to either
INPUT 5
or
INPUT 8
, depending on which of
the
Dual SD/HD-SDI Module
inputs (A or B) was last used. Press Input 5 again to
display from the other
Dual SD/HD-SDI Module
input.
Menu
Press Menu to enter or exit the projector’s menu system.