Runco Video Xtreme VX-40d Owner'S Operating Manual Download Page 7 | Manualshive

Page: 7 / 102

Runco Video Xtreme VX-40d Owner'S Operating Manual Download Page 7

7

Introduction

The  Runco  VX-40d,  VX-50d,  VX-60d  and  VX-80d  Video  Xtreme™  projectors  are
professional  3-chip  projectors  based  on  next-generation  Digital  Light  Processing™
(DLP™)  technology  by  Texas  Instruments™.  These  projectors  are  compatible  with
standard  international  video  formats  and  can  interface  with  IBM®-compatible  PC,
Macintosh®  computers  and  workstations.  All  models  deliver  high-brightness,  high-
resolution, and high-quality images. Runco Video Xtreme™ projectors are an ideal choice
for most exclusive home theaters.

Key Features

• Native SXGA+ resolution (1400 x 1050, fully
scaleable)
• 10-bit video processing
• Built-in multi-standard video decoder
• Replaceable Xenon lamp
• Motorized lens mount
• Auto-setup feature
• Status LED display on built-in keypad for easy projector status monitoring
• Control with IR or built-in keypad

Refer to Section 6 for a complete list of Specifications including Brightness and
Contrast.

How the Projector Works

The projector accepts video input signals for projection onto front or rear flat
screens. High brightness light is generated by an internal Xenon lamp then
modulated by three DMD (digital micromirror device) panels that provide digitized
red, green or blue color information. Light from the “on” pixels of each panel is
reflected, converged and then projected to the screen through a single front lens,
where all pixels are perfectly superimposed as a sharp full-color image.

The following listed items are shipped with your projector. Ensure you have received all
these items before using your projector.

• User’s Manual
• Programmable theater master remote (includes four, 1.5V AAA batteries)
• Power cord
• Warranty Card

1.1 Projector overview

1.2 Components

SECTION 1

«
...
5
6
7
8
9
...
»

Summary of Contents for Video Xtreme VX-40d







































































































Reviews:

No comments