40
All available channels are
listed in the
Channel Setup
menu, which describes
how each channel can be
accessed and which serves
as the gateway for editing,
copying
and
deleting
channels.
From the presentation level press Menu to display the
Main
menu. To display the
Channel
Setup
menu, press 3 , or move the highlight to the
Channel Setup
option and press.
The
Channel Setup
menu will appear (see sample at right), with the active channel
highlighted.
WHAT APPEARS IN CHANNEL SETUP MENU?
This menu
lists all channels defined so far and indicates where they are
connected on the input panel. The far left column lists channel
numbers currently defined. The values in the far right columns
indicate horizontal and vertical frequencies—if someone has defined a name for this
channel, it appears here instead. Remaining columns contain details pertaining to each
channel setup, such as its switcher number (always 0 = projector), slot location, a variety
of icons indicating access to each channel, and an abbreviated description of each signal
type. See
Editing a Channel Setup
for details.
NOTE: If you have more than a handful of channels, use and to see the remaining channels
not visible in the initial display of channels.
SIGNAL TYPE — Either channel list, whether the Channel key list or the
Channel Setup
menu, identifies signal types in a shortened form as defined below. These descriptors
indicate what signal information the projector uses to identify a match for a given channel,
and are preceded by either an “i” (interlaced signals) or “p” (progressive signal“). See Table
3.2.
Table 3.2. Abbreviations for Signal Type
Abbrev.
Signal Type
4WH
Composite (4 wire) on HC input
4WV
Composite (4 wire) on V input
SG
Sync-on-green
5W
Separate H,V
5WR
Separate H,V swapped
SVid
S-Vid
CVid
Composite Video
Dig
Digital
What Channels
➤
Are Defined So Far?
Figure 3.9. All Channels Appear in the
Channel Setup Menu
Section 3: Operation
Section 3: Operation