Operation
Runco LS-10d and LS-10HBd Installation/Operation Manual
59
PRE
L
IMINAR
Y
You should save changes to any of the following settings to a preset; otherwise they will
be lost when a new input source or resolution is selected:
• Brightness
• Contrast
• Color saturation
• Tint
• Sharpness
• Gamma
• Lamp Settings
• Color temperature and white balance
To select a memory preset, press
or
to highlight it and press
ENTER
.
To save the settings for the current input and display mode to the Custom 1 or Custom 2
memory preset, select it, press
or
to highlight Save and press
ENTER
.
To reset the Custom 1 or Custom 2 memory preset to its factory-default state, select it,
press
or
to highlight Reset and press
ENTER
.
Sleep Timer
Select Sleep Timer from the Main Menu to turn off the LS-10 after a specified interval.
Press
or
to select Off, 30 Minutes, 60 Minutes, 90 Minutes, 2 Hours or 4 Hours.
Then, press
ENTER.
To save the settings for the current input and display mode to the
ISF Night or ISF Day memory preset, select Save ISF Night or Save
ISF Day from the Calibration menu (refer to
Save ISF Night/Save
ISF Day
on page 66).
Note
S
leep Timer
Î
Off
30 Minutes
60 Minutes
90 Minutes
2 Hours
4 Hours
Summary of Contents for LIGHTSTYLE LS-10D
Page 2: ......
Page 10: ...x Runco LS 10d and LS 10HBd Installation Operation Manual P R E L I M I N A R Y Notes ...
Page 125: ......
