Installation
42
Runco LS-10d and LS-10HBd Installation/Operation Manual
PRE
L
IMINAR
Y
3.8
Primary Lens
Adjustments
To access the motorized lens controls:
1.
On the DHD Controller remote control or front panel, press
MENU
.
2.
Select
S
ervice
from the Main Menu and enter the Service Menu passcode.
3.
Select
Di
s
play Device
from the Service Menu.
4.
Select
Configure
from the Display Device menu, then select
Len
s
.
The Lens menu gives you a great deal of control over the picture size, position and focus:
Focus
To focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then,
press and hold the
ENTER
button.
Zoom
To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign
(-). Then, press and hold the
ENTER
button.
To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+).
Then, press and hold the
ENTER
button.
Vertical and Horizontal
Lens Shift
To change the lens position, use the cursor buttons to highlight “Left,” “Right,” “Up” or
“Down” in the Lens menu. Then, press and hold the
ENTER
button to shift the lens in that
direction.
To return the lens to its home position (no horizontal or vertical shift), use the cursor
buttons to highlight “Home” in the Lens menu. Then, press the
ENTER
button.
3.9
Adjusting the Picture
Orientation
By default, the LS-10 is configured for a “floor/front” installation, in which the projector is
installed upright and in front of the screen. If it is installed behind the screen and/or
mounted on a ceiling, you must change the picture orientation. To do this:
1.
On the DHD Controller remote control or front panel, press
MENU
.
2.
Select
S
ervice
from the Main Menu and enter the Service Menu passcode.
3.
Select
Di
s
play Device
from the Service Menu.
4.
Select
Configure
from the Display Device menu, then select
In
s
tallation
.
5.
Select
Orientation
, then choose Floor/Rear, Ceiling/Front or Ceiling/Rear, to match
the installation method.
You must enter a passcode to access the Service menu.
Note
➤
➤
➤
You must enter a passcode to access the Service menu.
Note
Summary of Contents for LIGHTSTYLE LS-10D
Page 2: ......
Page 10: ...x Runco LS 10d and LS 10HBd Installation Operation Manual P R E L I M I N A R Y Notes ...
Page 125: ......
