Runco LIGHTSTYLE LS-10D, Installation & Operation Manual

Page: 29 / 126

Controls and Functions
Runco LS-10d and LS-10HBd Installation/Operation Manual 13
PRE
L
IMINAR
Y
1. IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2. OFF ( S tandard) / S leep Timer = 30 Minute s (Extended)
Press to turn off the DHD Controller and projector. In extended mode, press to set the
Sleep Timer to 30 minutes.
3. ON ( S tandard) / S leep Timer = Off (Extended)
Press to turn on the DHD Controller and projector. In extended mode, press to
disable the Sleep Timer.
4. A s pect Ratio S election Button s
Use these buttons to select an aspect ratio directly, as follows:
16:9 ( S tandard) / S leep Timer = 60 Minute s (Extended)
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio. In extended
mode, press to set the Sleep Timer to 60 minutes.
4:3 ( S tandard) / S leep Timer = 90 Minute s (Extended)
Scales the input signal to fit 4:3 display mode in the center of the screen. In extended
mode, press to set the Sleep Timer to 90 minutes.
LETBOX (Letterbox - S tandard) / S leep Timer = 2 Hour s (Extended)
For viewing non-anamorphic (“full-screen”) DVDs on a 16:9 screen. In extended
mode, press to set the Sleep Timer to 2 hours.
V-WIDE (VirtualWide - S tandard) / S leep Timer = 4 Hour s (Extended)
Enlarges a 4:3 image horizontally in a non-linear fashion to fit 16:9 full screen display.
In extended mode, press to set the Sleep Timer to 4 hours.
CINEMA ( S tandard) / Video 1 Input (Extended)
For viewing 2.35:1 source material. In extended mode, press to select the Video 1
(Composite 1) input.
V-CINE ( S tandard) / Component Input (Extended)
Selects the Virtual Cinema aspect ratio, used for viewing 16:9 source material on a
2.35:1 screen. In extended mode, press to select the Component input.
NATIVE ( S tandard) / HD 1 Input (Extended)
Displays the source signal in its native resolution, centered in the display area. In
extended mode, press to select the HD 1 input.