Runco LIGHTSTYLE LS-10D, Installation & Operation Manual

Page: 30 / 126

Controls and Functions
14 Runco LS-10d and LS-10HBd Installation/Operation Manual
PRE
L
IMINAR
Y
5. Numeric Button s ( S tandard)
Use these buttons to enter numeric characters (0 ... 9), such as when changing
remote control codes (refer to
Remote Code on page 75).
Numeric Button s (Extended)
In extended mode, press a numbered button to select a video source, as follows:
6. S CREEN 1 ( S tandard) / Video 3 Input (Extended)
S CREEN 2
Use these buttons to select a screen profile. For more information, refer to Screen on
page 52.
In extended mode, press S CREEN 1 to select the Video 3 (Composite 3) input.
7. Memory Pre s et Button s :
I S F NIGHT ( S tandard) / S CART (Extended)
Press to recall settings for the current input from the “ISF Night” memory preset. In
extended mode, press to select the SCART input.
I S F DAY ( S tandard) / Video 2 (Extended)
Press to recall settings for the current input from the “ISF Day” memory preset. In
extended mode, press to select the Video 2 (Composite 2) input.
CU S T 1 ( S tandard) / 3D Mode = Off (Extended)
Press to recall settings for the current input from the “Custom 1” memory preset. In
extended mode, press to set the 3D Mode to Off (for 2D content).
CU S T 2
Press to recall settings for the current input from the “Custom 2” memory preset.
8. EXIT
Press this button to exit the current menu and return to the previous one.
9. MENU
Press this button to access the OSD controls, or to exit the current menu and return
to the previous one.
Remote Control Button S ource A ss ignment in Extended Key Code Mode
1
HD 2
2
HDMI 1
3
HDMI 2
4
HDMI 3
5
HDMI 4
6, 7, 8, 9, 0
Not Assigned