RuggedCom RuggedMC RMC30 User Manual Download Page 93

Page: 93 / 138

4. Diagnostics

ROS® v3.11User Guide

RMC30

Running Time

Synopsis: DDDD days, HH:MM:SS

The length of time since the device was last powered on.

Total Powered Time

Synopsis: DDDD days, HH:MM:SS

The cumulative powered up time of the device.

CPU Usage

Synopsis: 0 to 100

The percentage of available CPU cycles used for device operation as measured over the
last second.

RAM Total

Synopsis: 0 to 4294967295

The total number of bytes of RAM in the system.

RAM Free

Synopsis: 0 to 429496729

The total number of bytes of RAM still available.

RAM Low Watermark

Synopsis: 0 to 4294967295

The total number of bytes of RAM that have not been used during the system runtime.

Temperature

Synopsis: -32768 to 32767 C

The temperature of the CPU board.

Free Rx Bufs

Synopsis: 0 to 4294967295

Free Rx Buffers.

Free Tx Bufs

Synopsis: 0 to 4294967295

Free Tx Buffers.

4.3. Viewing and Clearing the System Log

The system log records various events including reboots, user sign-ins, alarms and
configuration saves.

Summary of Contents for RuggedMC RMC30











































































































































Search results

Summary of Contents for RuggedMC RMC30

Reviews:

Related manuals for RuggedMC RMC30

Brands by name

Popular brands

RuggedCom RuggedMC RMC30, User Manual

Search results

Summary of Contents for RuggedMC RMC30

Reviews:

Related manuals for RuggedMC RMC30

Brands by name

Popular brands