1. Administration
ROS® v3.11User Guide
12
RMC30
Figure 1.1. Main Menu With Screen Elements Identified
The command bar offers a list of commands that apply to the currently displayed menu. These
commands include:
• <Ctrl-Z> to display help on the current command or data item
• <Ctrl-S> to switch to the CLI shell
• <Ctrl-Up/Down> to jump to next/previous page of a status display
The main menu also provides a <Ctrl-X> command, which will terminate the session. This type
of menu is accessible via serial console, telnet session and SSH session.
1.1.3. Making Configuration Changes
When changing a data item, the user selects the data item by the cursor keys and then pressing
the enter key. The cursor will change position to allow editing of the data item.
Typing a new value after pressing enter always erases the old parameter value. The left and
right cursor keys can be used to position the edit point without erasing the old parameter value.
The up and down cursor keys can be used to cycle through the next higher and lower values
for the parameter.
After the parameter has been edited, press enter again to change other parameters. When
all desired parameters have been modified, press <Ctrl-A> to apply changes. The switch will
automatically prompt you to save changes when you leave a menu in which changes have
been made.
Some menus will require you to press <Ctrl-I> to insert a new record of information and <Ctrl-
L> to delete a record.
