Mounting and Powering the SCG
Mounting the SCG onto a Server Rack
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.4, 800-71126-001 Rev A
22
Mounting the SCG onto a Server Rack
The SCG is a 2U form factor server designed for mounting onto a standard EIA 19”
server rack. The supplied mounting hardware supports mounting on server racks
that are 22.5” to 32.5” deep. For racks of depth less than 22.5”, use the TMLC-
MOUNT21 rack mount kit (available at Avnet and manufactured by Kontron).
Before installing the SCG appliance onto a server rack, verify that all package
contents (see
) are included and ensure that you have prepared
all the required hardware and tools.
What You Will Need
•
3/8-inch hex driver or wrench
•
Phillips (crosshead) screwdriver, #1 and #2 bits
•
Anti-static wrist strap and conductive foam pad (recommended)
Step 1: Unpack the Rack Mount Kit
Refer to
and verify that the rack mount kit contents are
complete.
