Ruckus Wireless SCG-200, Getting Started Manual

Page: 16 / 99

Preparing to Set Up the SmartCell Gateway 200
Before You Begin
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.4, 800-71126-001 Rev A
16
RJ45 Serial Port Pinouts
The following table shows the pinouts for the RJ45 serial ports on the front and rear
panels.
Control Panel on the Front Panel
Figure 4 shows the control panel on the front panel of the SCG. For descriptions of
the numbered parts, refer to Table 4 .
Figure 4. Control panel on the SCG front panel
Table 3. RJ45 serial port pinouts
Pin Signal Name Description
1 SPB_RTS RTS (request to send)
2 SPB_DTR DTR (data terminal ready)
3 SPB_OUT_N TXD (transmit data)
4 GND Ground
5 SPB_RI RI (ring indicate)
6 SPB_SIN_N RXD (receive data)
7 SPB_DCR_DCD Data Set Ready/Data Carrier Detect
8 SPB_CTS CTS (clear to send)
Table 4. Control panel parts
Number Description
1 Power button
2 System reset button
3 System status LED
12
11
10 9 8
7
1
2 3 4 5 6