Configuring the SCG for the First Time
Creating an AP Zone
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.4, 800-71126-001 Rev A
62
Tunnel Type
Select an option for tunneling WLAN traffic back to the
controller:
• Ruckus GRE
• SoftGRE
• SoftGRE + IPSec
Tunnel Profile
Select the tunnel profile that you want to use. If you want
to use Ruckus GRE tunneling for this AP zone, you can
use the default tunnel profile or you can select a profile
that you created. If you want to use SoftGRE (or
S IPSec) tunneling, you must first create a
tunnel profile.
NOTE: Instructions for creating Ruckus GRE, SoftGRE,
and S IPSec tunnel profiles are provided in the
Administrator Guide
.
Syslog Options
If you have a syslog server on the network and you want
the SCG to send syslog data to it, select the
Enable
external syslog server for APs in this zone
check box.
The following boxes are provided:
•
IP Address:
Type the IP address of the syslog server.
•
Port
: Type the port number that has been opened on
the server for syslog data. The default port number is
514.
Advanced Options
Channel Mode
If you want to allow outdoor APs that belong to this zone
to use wireless channels that are regulated as indoor use
only, select the
Allow indoor channels
check box.
Background Scanning
If you want APs to automatically evaluate radio channel
usage, enable and configure the background scanning
settings on both the 2.4GHz and 5GHz radios.
By default, background scanning is enabled on both
radios and set to run every 20 seconds.
Table 12. Configuration options in the Create New Zone form (Continued)
Option
Description
