RTW SurroundMonitor 10600, Operating Manual

Page: 270 / 300

RTW SurroundMonitor 10600 270
RTW SurroundMonitor 10660-VID
9. Check wiring and connections.
10. Place the main pcb with the attacted connector panel back to its holder
bases (A). Take care about the wiring of the connecting flat cable. It has
to be directed through the right sided gap of the pcb without clamping
and may only stick out for about 1 - 2 cm maximum. Avoid damage
because of canting. Now first fasten the main pcb with its three screws
(B), then fasten the connector panel with its two (10600-PLUS, spare out
the middle hole) resp. three (10600) screws from the bottom side (C).
(Fig. E 7-10)
Fig. E 7-10: Remounting the main pcb and the connector panel
E 7 Service • E 7.2 Display exchange of 10600 models