RTW SurroundMonitor 10600, Operating Manual

Page: 181 / 300

RTW SurroundMonitor 10600 181
RTW SurroundMonitor 10660-VID
E 3.3 Menu Access
Using the setup menu you can easily configure individual display modes as
well as global system options to fit your personal needs. To do so you should
first choose the display mode you want to modify by pressing the
MODE 1/
SET or MODE 2/SET button. A small green spot (see Fig. E 3-1) at the right
edge of the display shows which mode is currently selected. In case you
want to change global system parameters (Remote, General), you are free
to select any of the two modes.
Fig. E 3-2: The main menu of the SurroundMonitor 10600/10660-VID
Example:
SurroundMonitor
10600
See Fig. E 3-2
See Chapter E 5.4
See Fig. E 3-1
Press and hold the MODE/SET button marked with the green spot for more
than 1 second to enter the menu for Mode 1 or Mode 2 (see Fig. E 3-2). All
menu pages are displayed in blue. The key functions in menu mode are
defined by captions shown at the right edge of the display (Quit, Esc, Up,
Dwn, Sel). A short description follows beneath.
Note:
In case the menu access was locked by the Menu-Lock function in the
General submenu, the display will show a form to enter the previously
stored access code. When Menu-Lock is activated the menu can therefore
only be accessed after entering the right four-digit code.
E 3 Quick Start • E 3.3 Menu Access