RTW SurroundMonitor 10600, Operating Manual

Page: 250 / 300

RTW SurroundMonitor 10600 250
RTW SurroundMonitor 10660-VID
See Chapter E 5.2.6
E 5.2.8 Multi Instrument 1: Toggle Selection
In normal display operation, repeatedly pressing the same MODE/SET button
cycles the Multi Instrument 1 through all display modes defined in this menu.
Each display mode can be switched on or off. The toggle selection is saved
as part of each preset.
Use Up or Dwn key to access all available display modes for Multi Instru-
ment 1 . On each selection use the Sel key to switch this display mode On
or Off. All modes switched to On will be available for the Toggle function.
SSA Off (pri. instr.)
Vectorscope Off
RTA Off
Multi-Correlator Off
Status Off
Note:
The display modes available in this menu depend on the selection of the
Program Meter (PPM or ITU BS.1771) and on the respective selection
for Program Meter: Mode (see table in E 5.2.6 for details). The current
selected instrument for Primary Function is marked with (pri. instr).
Fig. E 5-16: The Toggle Selection submenu for Multi Instrument 1
on Modify Preset menu (Fig. E 5.2):
©
( Up ), Dwn to Multi Instrument 1
and Toggle Selection,
©
Sel to open according submenu
E 5 Menu • E 5.2 Modify Preset