background image

62  Basic Operation

KP Series

Bosch Security Systems, Inc.

Technical Manual

 F.01U.304.914 Rev. 05

Graphical Call Waiting Window Operation

Use Table 4 on page 62 and Figure 15 on page 61 to understand the different states of the CWW.

Display or Hide the CWW

To 

display the CWW

, do the following:

 >

On the keypanel, lift up on the 

CWW key

.

The graphical call waiting window appears.

To 

hide the CWW

, do the following:

 >

Press the 

CLR button

.

The CWW closes

.

NOTE:

If the CWW list is visible and not empty, it remains visible until hidden. If the CWW list is visible, but 

empty, it auto-hides after a five-second timeout.

Incoming Calls

When a call is received at the keypanel, the graphical CWW list appears on the keypanel display. The CWW can be configured 
to retain call history for three, up to nine calls. The most recent call is inserted at the top of the graphical CWW list (position 1) 
with a white background (See Figure 15 on page 61). Other items in the CWW list are shifted down, as necessary. When a new 
call is received, the last call in the list is dropped, unless it is highlighted in the graphical CWW. In this case, it cannot be 
shifted off the CWW list. 

For more information on how to configure the CWW, see “Service Menu, CWW” on page 238.

To 

scroll the CWW list

, do the following:

 >

When the CWW list is visible, press the 

arrow up button

 or the 

arrow down button

.

The highlight moves through the scroll list

.

TABLE 4. 

Graphical CWW Call Description

Item

Description

New Call

White background

Selected Call / Not Talking

Cyan background

Selected Call / Talking

Green background

Old Call

Gray background

KP-5032

KP-4016

FIGURE 17.

Graphical Call Waiting Window Highlighted Call

Summary of Contents for KP-4016



















































































































































































































































































































Reviews: