RTS KP-4016, Technical Manual

Page: 74 / 306

74 Basic Operation KP Series
Bosch Security Systems, Inc.
Technical Manual F.01U.304.914 Rev. 05
To assign a relay to a UPG button , do the following:
1.
On the keypad, press the MENU button .
The Information menu appears .
2.
From the Information menu, using the arrow buttons, select Service .
3.
Press the SEL button .
The Service menu appears .
4.
Using the arrow buttons, select Local GPIO .
5.
Press the SEL button .
GPIO Inputs and GPIO Outputs appears in the panel display.
6.
Using the arrow buttons, select GPIO Outputs .
7.
Press the SEL button .
Relay 1 and Relay 2 appear in the panel display.
8.
Using the arrow buttons, select the Relay 1 or Relay 2 .
9.
Press the SEL button .
Not Assigned, Talk Key, and UPG 1 through UPG 9 appears in the panel display .
NOTE: If you are using a KP-4016/4016PB, there are only two UPG assignments available. To assign UPG2 on a
KP-4016/4016PB or UPG5-9 on the KP-5032/5032PB, you must first press the SHIFT button.
10.
Using the arrow buttons, select a UPG button .
The relay is assigned to the desired UPG button .
NOTE: Once a relay is programmed to the button, and the keypanel is not in menu mode, pressing the UPG button
activates the assigned relay until the button is released.
To activate the screen saver from a UPG button , do the following:
1.
On the keypad, press the MENU button .
The Information menu appears .
2.
Using the arrow buttons, select Service .
3.
Press the SEL button .
The Service menu appears .
4.
Using the arrow buttons, select Scrn Saver .
Activate, Delay and Mode appear .
5.
Using the arrow buttons, select Activate .
6.
Press the SEL button .
The screen saver activates on the keypanel .
7.
Press and hold the UPG button you want to assign this option to for two seconds.
Menu position saved appears in the panel display and the screen saver feature is assigned to the UPG button.
Other Common UPG Assignments available:
•
UPG Button to trigger panel swap, see “Key Options Menu, Panel Swap” on page 230.
•
UPG Buttons to turn keys off with a single press, see “Key Options Menu, Turn Off” on page 234.
•
UPG Buttons to DIAL or DROP a TIF, see “Dialing and Hanging Up” on page 259.