RTS KP-4016, Technical Manual

Page: 22 / 306

22 Installation KP Series
Bosch Security Systems, Inc. Technical Manual F.01U.304.914 Rev. 05
KP-5032/5032PB Installation
IMPORTANT: If you plan to use the Power Supply Mounting Bracket, we recommend you install the mounting bracket
before cabling the keypanel. For information on different power supply mounting options, see “Power
Supply Mounting Options” on page 297.
IMPORTANT: When an OEI-2 power supply is used on a KP-Series keypanel, the following warning icon blinks to
display the wrong power supply is being used. No damage occurs.
To install the KP-5032/5032PB , do the following:
1.
On the rear panel, plug the 24 VDC power connector (A) of the power supply into the power connector on the back
panel of the unit.
2.
Connect an RJ-12 or RJ-45 (568B or USOC) cable (B) with RTS cabling to the J8 FRAME connector.
OR
Connect a
CAT-5e cable (C) to either J11 or J12 ETHERNET connector.
NOTE:
•
If using the optional J13 fiber connector, connect a fiber connector (D) to the OPTICAL fiber
connector on the rear panel.
•
The KP-Series panels can have both AIO and Ethernet connected simultaneously, an the user can switch
between the connections using the menus.
3.
Once the unit is cabled, plug the power supply power cord into the wall outlet or a power strip.
FIGURE 4.
KP-5032 Installation