RTS KP-4016, Technical Manual

Page: 251 / 306

KP Series KP-4016/5032 Menu System 251
Bosch Security Systems, Inc. Technical Manual F.01U.304.914 Rev. 05
2.
Press the SEL button .
The DNS 1 Server Address appears with the first octet blinking in the panel display.
3.
Using the number pad, enter the first octet number in the DNS Address.
4.
Press the SEL button .
The focus shifts to the second octet .
5.
Using the number pad, enter the second octet number in the DNS Address.
6.
Press the SEL button .
The focus shifts to the third octet .
7.
Using the number pad, enter the third octet number in the DNS Address.
8.
Press the SEL button .
The focus shifts to the last octet .
9.
Using the number pad, enter the last octet number in the DNS Address.
10.
Press the SEL button .
The OKP Setup menu options appear in the panel display .
To configure the Domain name , do the following:
1.
Using the arrow buttons, select Domain .
2.
Press the SEL button .
The domain name appears with the first character blinking in the panel display.
3.
Using the up and down arrow buttons or the Aux shaft encoder, select a new character at the current position .
4.
Using the left and right arrow buttons or the Main shaft encoder, move to the next or previous character position .
5.
Press SHIFT to insert a character at the current position.
6.
Press the SEL button
OR
Press the
AUX shaft encoder to move to the next character.
NOTE: Press BACK or press the MAIN shaft encoder to cancel editing. A confirmation is required.
7.
Press FWD or move to the end of the name and Press the SEL button (or the AUX shaft encoder) to save changes.
8.
Repeat steps 3 to 7 until the domain is named.
9.
Once finished, press the FWD button.
Save Name? appears in the panel display.
10.
Press the SEL button .