RTS KP-4016, Technical Manual

Page: 194 / 306

194 KP-4016/5032 Menu System KP Series
Bosch Security Systems, Inc. Technical Manual F.01U.304.914 Rev. 05
To configure the 5-band gain for outputs , do the following:
1.
Starting at the Audio Options|Advanced|Filters menu, select Equalization .
2.
Press the SEL button .
Inputs and Outputs appears in the panel display.
3.
Using the arrow buttons, select Output
4.
Press the SEL button .
Front Spkr and Rear Spkr appear in the panel display.
5.
Using the left and right arrow buttons, select either Front Spkr or Rear Spkr .-
6.
Press the SEL button .
Frequencies, Gains, Mode, and Presets appear in the panel display
7.
Using the left or right arrow buttons, select Gains .
8.
Press the SEL button .
The 1: through 5: band scroll boxes appear in the panel display.
9.
Using the up and down arrow buttons, select the gain level you desire for Band 1.
10.
Using the left and right arrow buttons, select the Band 2 scroll box .
11.
Using the up and down arrow buttons, select the gain level you desire Band 2.
12.
Repeat setting the gain levels on the remaining bands .
13.
Repeat steps 4 through 11 for each input, desired.
Notch
The Notch menu allows you to add a notch filter to the Matrix In source. This can be useful when the keypanel data port
signal is being heard in the audio line due to cable routing problems.
By default, the notch filter is set to Disabled .
Available options for this menu are:
Disabled
Narrow 9500hz–9700Hz (200Hz band)
Default 9450hz–9750Hz (300Hz band)
Wide 9400hz–9800Hz (400Hz band)