220 KP-4016/5032 Menu System
KP Series
Bosch Security Systems, Inc.
Technical Manual
F.01U.304.914
Rev. 05
Key Assign Menu, Special List
Special List
assigns a key that talks and/or listens to a special list. The key is not available until members have been assigned
to the special list in AZedit.
NOTE:
Special List members can be non-keypanel devices that cannot activate talk and listen paths. Therefore, if you
want full communication with all members of the special list, you may need to assign both talk and listen on the
key.
To
assign a Special List to the keypanel key
, do the following:
1.
Starting at the KeyAssign|Special List menu, select the
Special List
you want to assign to the keypanel key.
2.
Press the
SEL button
.
A list of auto-functions appear.
3.
Using the arrow buttons,
select the
auto-function
you want to assign to the Special List assignment, if applicable.
4.
Press the
SEL button
.
Tap Key appears in the panel display.
5.
Press
down
on the keypanel key position
where you want the Special List assignment to appear.
The key color changes and the alpha appears on the key
.
Key Assign Menu, Sys Relay
Sys Relay
refers to any of several types of control devices that can exist in the intercom system, including:
•
The 8 GPI outputs from an ADAM Frame (J11 on the XCP-ADAM-MC Breakout Panel).
•
The GPI outputs from an Cronus (J9 on the back of Cronus).
•
The GPI outputs of an Zeus III Frame (located on the rear panel).
•
The 16 GPI outputs of a UIO-256 or GPIO-16 Frame (J5 on the UIO-256/GPIO-16 back panel).
To
assign a Relay to the keypanel key
, do the following:
1.
Starting at the KeyAssign|Sys Relay
menu, select the
Relay
you want to assign to the keypanel key.
2.
Press the
SEL button
.
A list of auto-functions appear.
NOTE:
You will not hear anything if you listen to a Relay, but you can activate the relay with either a talk or listen
key.
3.
Using the arrow buttons,
select the
auto-function
you want to assign to the relay assignment, if applicable.
4.
Press the
SEL button
.
Tap Key appears in the panel display.
5.
Press down on the
keypanel key position
where you want the Relay assignment to appear.
The key color changes and the alpha appears on the key
.
Summary of Contents for KP-4016
