SecuRam Systems Inc. USA
Page 1
Important:
●
For indoor use only.
●
Use one 9V alkaline battery.
Always use an alkaline battery for high quality
performance, otherwise controller might not work well.
●
Low Battery Alert:
The display will alert low battery when battery voltage
reaches 5.4±0.2V.
PLEASE REPLACE THE BATTERY IMMEDIATELY.
●
When the display alerts
low battery
, Digital Entry Pad can only be operated
to lock or unlock. Operations, such as enrolling, deleting or time-delay
setting, are not permitted.
Battery Replacement Instructions
1)
In the back of Entry Pad you will see one 9 V alkaline battery. Take the
battery out of the battery compartment.
2)
Gently remove the connector by unsnapping it from the two terminals on
the top of the battery.
Never Pull on the Battery Leads.
3)
Connect a new 9 V battery to the battery clip.
4)
Put the battery and the leads completely back into the battery
compartment.
For mounting and wiring information refer to the installation instruction
in this manual.
Document No.: 2U-EC0601AL02130919
Version No.: V1.01 USER
ProLogic L02 Operating Instructions
30 Codes; 2 Manager Codes, 28 Users
Super Code
Time Delay 0-99 minutes; Time Window 1-15min;
Manager codes are TDO and Dual Overide Codes
System Recovery
Enable/Disable User Codes
Can control up to 4 locks
Penalty Time after 4 incorrect code entries = 5 min
Can be paired with any SecuRam lock body
