11
It’s Under Control
®
CHAPTER 2 | FEATURES AND DESCRIPTION
VXP-82 REAR PANEL DESCRIPTION
No. Name
Function
A
AC Power Input
Connect the power cord provided. Accepts AC power of
100-240V 50/60Hz. Power Button: Press to power on/
off VXP-82.
B
HDMI IN1
Connect to an HDMI source device.
C
HDMI IN2
Connect to an HDMI source device.
D
HDMI IN3
Connect to an HDMI source device.
E
DP IN4
Connect to Display Port video source device.
F
ETHERNET
Connect to an Ethernet network to share network
access with Ethernet equipped devices via the HDBaseT
extenders.
NOTE: This port is segmented from the LAN port,
keeping the shared network the network used by the
control system separate if needed.
G
LAN
Connect to an Ethernet network to enable telnet or web
UI Control.
H
RTI COM
Connect to a ZM-24 Zigbee transceiver module for two-
way communication with RTI handheld controllers.
I
EXPANSION
Connect to a CB-8 connecting block to receive IR
signals and two-way RS-485 communication from RTI
wired controllers.
J
MIC/LINE IN 1-2
Selector switch and
Ports 1&2
PHANTOM POWER/MIC/LINE IN audio selector switch:
PHANTOM POWER: MIC input with phantom power.
MIC: MIC input.
LINE IN: Line in input
*Warning*: Before the selector switch is set to position
“PHANTOM POWER”, ensure any Line In device
connected to“MIC/LINE IN” port has been removed or
device damage may occur.
MIC/LINE IN Ports: Connect to audio devices based on
the settings of PHANTOM POWER/MIC/LINE IN Selector
Switch.
See Pinout section.
A
B
C
D
E
F
G
H
I
J