17
It’s Under Control
®
CHAPTER 3 | INSTALLATION AND OPERATION
WEB INTERFACE
The Web UI designed for the VXP-82 is available for basic controls and advanced settings
for the device. The Web UI can be accessed through an internet browser.
Get Access to the Web UI
1. Connect your PC and the LAN port of the switcher to the same local area network.
2. Input the switcher’s IP address in your browser and press Enter. The following window
will display.
3. Enter the default password “admin” and click “Login”.
Web UI Introduction
The Web UI main page includes several tabs for basic and advanced settings including
Video Control, Audio Control, Configuration and Settings.
VIDEO CONTROL
Video Switch
This section manages distribution of input video source to output displays. Click the switch
button (white to green) to select the input source for the output display.
•
Signal Status:
Show the status of input sources, active (green) or no signal (grey).
•
CEC Control (ON/OFF):
Click to power on or off the CEC-enabled display device
immediately.
By default, HDMI IN1 routes to HDMI OUT. HDMI IN2 routes to HDBT OUT.