21
It’s Under Control
®
CHAPTER 3 | INSTALLATION AND OPERATION
(3) CEC Control
•
Output:
Select Output port. HDMI OUT or HDBT OUT.
•
Auto CEC Control (ON/OFF):
Click to enable or disable the CEC Auto Control.
•
Delay Time (1~30min):
Click the up/down arrow to set the time for the display to
power off automatically when no signal is present. For example, if Auto control is set
to On and the time is set to 3 minutes, the output display will power off automatically
when there’s no signal at the display for 3 minutes.
By default, CEC Auto Control is set to ON.
(4) Output Resolution
Configure EDID setting of each input port.
Set the scaler for HDMI OUT and HDBT OUT to auto or fixed resolution.
When set to Auto scaling mode, the scaler will analyze the EDID of the connected
display and optimum resolution for the display. For HDBT OUT, displays which can
support higher than 4K@60Hz 4:2:0 will be recognized as a 4K@30Hz 4:4:4 display to
meet the ability of HDBaseT and scaler.
Go to the HDMI OUT and select the settings from its drop-down menu.
To set up the fixed resolution for HDMI OUT:
