![background image](http://html1.mh-extra.com/html/rti/vxp-82/vxp-82_installation-and-operation-manual_1497694013.webp)
13
It’s Under Control
®
CHAPTER 2 | FEATURES AND DESCRIPTION
VXP-82 REAR PANEL DESCRIPTION
No. Name
Function
A
RS-232 PORTS 1-2
RJ-45 output ports for RS-232 communication using
Cat-5 cable. The VXP-82 ships with two RJ-45 (female)
to DB-9 (male) adapters.
NOTE: RS-232 communication cabling should be limited
to 50 feet (16m) depending on baud rate.
See Pinout section.
B
MPIO PORTS 1-6
Each port is compatible with industry standard IR
emitters and IR repeating systems. Each output port is
capable of driving up to four IR emitters directly.
C
HDMI OUT
Connect to an HDMI display.
D
HDBT OUT
Connect to VXP-R HDBaseT Extender or compatible
HDBaseT receiver via a Cat 5e/6/7 cable.
E
FW PORT
Service use only.
F
SCALER
Service use only.
G
HDMI/HDBT SWITCH
Service use only.
H
VIDEO RESET
Use a pointed stylus to hold down the RESET button
for three or more seconds, and then release it to reset
VXP-82 video matrix only
.
I
AUDIO OUT 1-2
De-embedded audio outputs from the selected video
source. Connect to audio system such as an amplifier.
Factory default: Audio Port 1 assigned to HDMI output
and Port 2 assigned to HDBaseT output. Audio Ports can
be used interchangeably with any inputs, configured via
the web interface or driver commands.
See Pinout section.
B
C
D
E
F
G
H
I
A