53
Input channel operations
Input channel operations
Input channels can be assigned to DCA groups and mute groups.
Assignments to DCA groups and mute groups are made in the
GROUP ASSIGN popup.
1.
Access the CHANNEL DISPLAY screen for the desired
channel.
fig.ScrChDisp.eps
2.
Press [F5 (GROUP ASSIGN)] to access the GROUP ASSIGN
popup.
fig.ScrChGrpAsgnGuide.eps
Target channel
This indicates the channel that is the target of the GROUP
ASSIGN popup.
DCA GROUP select buttons
Use these to select the DCA group to which the channel will
be assigned.
MUTE GROUP select buttons
Use these to select the MUTE group to which the channel
will be assigned.
1.
Access the GROUP ASSIGN popup for the desired
channel.
fig.ScrChGroupAssign.eps
2.
Verify that the target channel is correct.
3.
Move the cursor to the desired DCA group select button,
and press [ENTER] to select it.
4.
Press [F8 (CLOSE)] to close the popup.
For details, refer to “DCA groups” (p. 108).
1.
Access the GROUP ASSIGN popup for the desired
channel.
fig.ScrChGroupAssign.eps
2.
Verify that the target channel is correct.
3.
Move the cursor to the desired MUTE group select
button, and press [ENTER] to select it.
4.
Press [F8 (CLOSE)] to close the popup.
For details, refer to “Mute groups” (p. 110).
Assigning channels to DCA
groups and MUTE groups
Accessing the GROUP ASSIGN popup
2
1
3
1
2
3
Assigning a channel to a DCA group
Assigning a channel to a MUTE group
M-300_e.book 53 ページ ２０１０年４月２２日 木曜日 午前８時１７分
