RSS M-300 Owner'S Manual Download Page 131

Page: 131 / 224

131

User settings

Here’s how to save the current user settings in USB memory. This
can be done if the current user setting is other than ADMIN or
GUEST.

Connect USB memory to the USB memory connector.

Access the USER screen.

fig.ScrUser.eps

Press [F3 (SAVE CURRENT)].

fig.ScrSaveCurrent.eps

The SAVE CURRENT USER popup will appear.

Use the name edit field to edit the user name.

For details on name editing, refer to “Editing a name” (p. 37).

To save the settings, press [F8 (SAVE)].

If you press [F7 (CANCEL)], saving to USB memory will be
cancelled.

If you save to identically named user settings in USB
memory, a caution message will caution you that the
previous data will be overwritten.

fig.UsrExists.eps

To save and overwrite the old data, press [F8 (REPLACE)].

If you press [F7 (CANCEL)], saving to USB memory will be
cancelled.

Here’s how to delete user settings from USB memory.

You can delete user settings if the current user setting has ADMIN
privileges.

Access the USER screen.

From the USB memory user list, select the user that you
want to delete.

Press [F4 (DELETE USER)].

fig.ScrUserDeleteConf.eps

A message will ask you to confirm that you want to delete
the user settings.

When you press [F8 (DELETE USER)], the user settings
you selected in step 2 will be deleted.

If you press [F7 (CANCEL)], deletion of the user settings will
be cancelled.

You can edit the name of a user. A name of up to eight characters
can be specified.

Access the USER screen.

From the user list, select the desired user.

Press [F7 (NAME EDIT)].

fig.ScrNameEdit.eps

The NAME EDIT popup will appear.

Use the name edit field to edit the user name.

Press [F8 (OK)] to finalize the name you edited and close
the popup.

If you press [F7 (CANCEL)], the name edit will be cancelled
and the popup will close.

For details on name editing, refer to “Editing a name” (p. 37).

Saving the current user settings in USB
memory

Deleting user settings

Editing the name of user settings

M-300_e.book 131 ページ２０１０年４月２２日　木曜日　午前８時１７分

Summary of Contents for M-300

































































































































































































































Search results

Summary of Contents for M-300

Reviews:

Related manuals for M-300

Brands by name

Popular brands

RSS M-300, Owner'S Manual

Search results

Summary of Contents for M-300

Reviews:

Related manuals for M-300

Brands by name

Popular brands