21
Explanation of the panels
Explanation of the panels
fig.FaderModSectGuide.eps
This section lets you control the
16
channels you selected in the
Layer section.
SEL buttons
Use these buttons to select the channel that you want to
control in the CHANNEL EDIT section or in the screen. The
[SEL] button of the currently selected channel will light.
SOLO buttons
These buttons turn solo on/off for each channel. The button
will light when solo is on.
Meters
These indicate the signal level of each channel.
“Editing the meter settings” (p. 96)
MUTE buttons
These turn muting on/off for each channel. The button will
be lit if mute is active.
Faders
These adjust the signal level of each channel.
fig.LayerSectGuide.eps
This section lets you select the channel layer that will be assigned
to the fader module section. The button of the currently assigned
channel layer will be lit.
USER1 layer button
USER2 layer button
This assigns the user fader layer 1 or user fader layer 2 to the
fader module section.
“Editing the user fader layers” (p. 134)
AUX/MTX/DCA layer button
This assigns AUX1–8, MTX1–4, and
DCA1–4
to the fader
module section.
CH 17–32 layer button
This assigns CH17–32 to the fader module section
CH 1–16 layer button
This assigns CH1–16 to the fader module section.
Fader module section
1
2
3
4
5
1
1
2
3
4
5
LAYER
section
2
1
2
3
4
5
1
2
3
4
5
M-300_e.book 21 ページ ２０１０年４月２２日 木曜日 午前８時１７分
