RS SAILING RS Quest, Rigging Manual

Page: 17 / 86

15
Add the turning block using the screws provided.
The inboard end of the bowsprit has two ropes emerging from it. The outboard end has one
rope with a plastic stopper on it. In order to insert the inboard end into the boat you will have
to remove the launch line (the rope coming out of the side). Insert the bowsprit, inboard end
first, into the hole in the bow of the boat.
Once inserted you should reattach the launch line to the bowsprit.
Remove the two black plastic plugs from
the holes in the channel that runs forwards
from in front of the centreboard case.
Add the metal eyelet from the
assymetric spinnaker kit using the two
M5 x 8mm screws provided.
M4 x 25mm Pozi head
M4 x 12mm Pozi head
k) Tack Line Eyelet
m) Adding the Spinnaker Pole
j)
l)
launch line
4.3 - Asymmetric spinnaker fittings.