21
Remove the plastic caps just further inside the
boat from the cleats you just added.
Add a metal eyelet from the symmetrical
spinnaker kit using the M5 x 8mm bolts provided.
Shackle a ratchet block from the symmetrical spinnaker kit
onto the eyelet.
Repeat on the other side of the boat.
Repeat on the other side of the boat.
Repeat on the other side of the boat.
Add the twinning line through the shroud eye, from inboard to out,
then tie a metal ring on the end with a knot-on-knot.
Repeat on the other side of the boat with
the other end of the twinning line.
o) Spinnaker Ratchet
p) Rigging the Twinning Line
m)
n)
Tie a figure of eight knot 1m from each end of the twinning
line then add a plastic bobble onto each end of the rope.
4.4 - Symmetrical Spinnaker Fittings.
Summary of Contents for RS Quest
