RS SAILING RS Quest, Rigging Manual

Page: 34 / 86

32
Pass one end of the jib halyard through the cleat on the port
side of the mast above the gnav bracket.
Attach the top part of the forestay to the mast.
Attach the lower part of the forestay to the jib furler joint
using the clevis pin and split ring.
Tie off both ends of the jib halyard at the bottom of the mast so that they
are easily accessible once the mast is stepped in the boat.
Add PVC tape around the clevis pin.
6.8 - Spinnaker Halyard Takeup Elastic
Tie the metal ring to one end of the spinnaker halyard takeaway
elastic found in the spinnaker pack using a knot-on-knot.
6.7 - Forestay
c)
a)
b)
a)
6.6 - Jib Halyard