10
4.1 - Toestraps
Start by attaching the toestraps to the thwart across the
middle of the cockpit.
To do this you will need a pozidrive screwdriver.
Make sure you attach the toestraps the right way round.
The ends with the webbing loop attach to the thwart. The
ends with the buckle
DO NOT
attach to the thwart.
The forward toestraps are separate and the aft toestraps
are joined together in a V shape.
Remove
ONE
of the screws from the toestrap
retainer on the thwart.
Rotate the toestrap retainer outwards to
allow you to slide the webbing loop on the
toestrap over it.
Rotate the toestrap retainer back into position
and replace the screw.
Repeat for all four toestrap retainers on the
thwart.
Webbing side up
a)
b)
c)
Summary of Contents for RS Quest
