RS Automation NX-POSI1, User Manual

Page: 2 / 196

Important User Information
Solid state equipment has operational characteristics differing from those of
electromechanical equipment. Because of this difference, and also because of
the wide variety of uses for solid state equipment, all persons responsible for
applying this equipment must satisfy themselves that each intended application
of this equipment is acceptable.
In no event will RS Automation Co., Ltd. be responsible or liable for indirect
or consequential damages resulting from the use or application of this
equipment.
The examples and diagrams in this manual are included solely for illustrative
purposes. Because of the many variables and requirements associated with any
particular installation, RS Automation Co., Ltd. cannot assume responsibility
or liability for actual use based on the examples and diagrams.
No patent liability is assumed by RS Automation Co., Ltd. with respect to use
of information, circuits, equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without
written permission of RS Automation Co., Ltd. is prohibited.
Throughout this manual, when necessary, we use notes to make you aware of
safety considerations.
Trademarks not belonging to RS Automation Co., Ltd are property of their respective companies.
WARNING
Identifies information about practices or circumstances that can
cause an explosion in a hazardous environment, which may lead to
personal injury or death, property damage, or economic loss.
IMPORTANT
Identifies information that is critical for successful application and
understanding of the product.
ATTENTION
Identifies information about practices or circumstances that can
lead to personal injury or death, property damage, or economic loss.
Attentions help you identify a hazard, avoid a hazard, and recognize
the consequence
WARNING
Labels may be located on or inside the equipment, for example, a
drive or motor, to alert people that dangerous voltage may be
present.
BURN HAZARD
Labels may be located on or inside the equipment, for example, a
drive or motor, to alert people that surfaces may be at dangerous
temperatures.