![background image](http://html.mh-extra.com/html/royal/er-145/er-145_manual_1493956061.webp)
TROUBLESHOOTING AND SERVICE
In case of operational difficulty
1 Be sure the
plugged
a working electrical outlet and no other electrical device
using the same power source Another
electrical motor on the same circuit could cause interference
register operations
2 Check control lock switch to be sure
the correct position See page 36
3 Review the operating instructions to be sure the transactions have been performed as described
instruction manual
4 If your register still does not function take the following steps
A Turn the control lock key to the
position
B Unplug power
from outlet
C Reconnect
to
D Re enter Program One
as desired
E Re enter Program Two '
as desired
F Turn the control lock key to the
position
CAUTION When you turn the control lock key to the
position and unplug the register the memory of the machine
erased
5 If the printing becomes
replace the ribbon as described on page
of
book If none of the above procedures corrects the
difficulty return the register postage PREPAID to the applicable service facility listed on page 58
For your protection the register should be sent insured Royal cannot assume any responsibility for loss or damage to
uninsured shipments Please include information on the difficulty experienced
the register as well as return address
information including name address
state
code The register should be carefully packed and adequately protected
against shock and rough handling IMPORTANT It
recommended that the original box and packing material be
retained
case shipment
necessary for service