OPERATION AND MAINTENANCE
Electrical Power Connection -
Cash Register operates on any standard three hole electrical outlet
120 volt 60 hertz) It
recommended that the cash register be connected to an electrical circuit where no other electrical device or appliance
connected which
may overload the circuit or cause electrical interference
the cash register It
best that a single circuit be provided for register
operations
To Operate - Before operating cash register, be sure that the register placed on a level surface to permit smooth operation of the register
cash drawer The operation of
register
simple however operations must be performed
the specific sequence or an automatic
electronic lock
prevent further operation
CAUTIONS
- Your register must never be covered when turned on,
prevent proper cooling of electronic components
- Use the dust cover when the register
not
operation to protect mechanical components from dust
- Take care to keep beverages and other liquids away from the machine to avoid spills which may foul electronic components
- To clean, use a soft, dry cloth, do not use organic solutions such as alcohol
- Your machine should be kept
areas free from dust dampness or extreme temperatures (hot or cold)
- After storage
extreme temperatures (below 32°F or above
allow the temperature inside the machine enough
to reach room
temperature before switching on
- Never pull the paper tape through the
to prevent damage always use the electronic paper feed
- Should electronic service be required use of an authorized service center
recommended
page 58)
