![background image](http://html.mh-extra.com/html/royal/er-145/er-145_manual_1493956016.webp)
LOADING PAPER
LOAD PAPER
The ER
register uses
4 dual carbonless paper to produce both a customer
receipt (outside) and a
record (inside) The register
also accept
standard
4 calculator paper for a single tape record
1 Plug
cash register
2 Cut or tear the end of the paper roll evenly for a straight even edge for
proper feeding through the
3 Place paper roll
paper holder so that the paper
feed from the bottom of
the roll (See
1 )
4 Insert both ends
using dual tape) or the end of a single paper tape
the
paper slot (See
2 )
5 Depress the paper [FEED] key until the paper catches and advances
through the printer
6 If paper does not feed through the printer make sure the paper
entered
properly inspect the end of paper tape
7 To insert the
winder
not necessary to remove the journal winder
spindle Simply advance the tape approximately
inches by using the
[FEED] key Then slide the inside pressure sensitive tape under
the
forks that extends on either
of the journal winder Press the [FEED]
again and hold down The journal tape
then
secure itself
the journal winder spindle (See
8 Pass the outside plain tape through the receipt window of the journal
printer cover
9 Replace journal printer cover
NOTE
recommended
use ROYAL brand
(57mm) bond quality paper which
help prevent dust deposits on the printer
mechanism found
inexpensive paper rolls Replace
ROYAL brand carbonless two ply paper order
or standard bond
quality calculator paper ROYAL order