Roxell Minimax Line, Use And Assembly Manual

Page: 63 / 94

ROXELL - 001 - 2112 MINIMAX LINE -- INSTALLATION INSTRUCTIONS
III--11
TO INSTALL THE FEEDER LINE
Put the tubes with the pans on the floor. Tube sockets pointed towards the 100kg hopper.
Slide a tube clamp over each socket.
Make a row at the spot where you will suspend the tubes.
100kg hopper.
FIGURE 22.
Tube clamp.
Connect the tubes : push each tube as far as possible into the socket of the next tube.
ATTENTION : All holes well aligned and pointing straight downwards ! (Welding seams upside.)
FIGURE 23.
INSTALL AN ANCHOR BRACKET :
FIGURE 24.
100kg
hopper.
every 3 feeder tubes when 3 or 4 pans/tube
every 2 feeder tubes when 1 or 2 pans/tube
Firmly tighten all tube clamps (Min. 10Nm.). Do not deform the tubes. By connecting all tubes on the floor you automatically
compensate for any unevenness of the floor.
THIS IS VERY IMPORTANT FOR THE SIMULTANEOUS OPENING AND CLOSING OF ALL WINDOWS IN
THE MINIMAX LINE PANS !