Roxell Minimax Line, Use And Assembly Manual

Page: 15 / 94

ROXELL - 001 - 2111 MINIMAX LINE -- INSTRUCTIONS FOR THE USER
I--9
PROBLEM CAUSE CORRECTIVE ACTION
8.Windows are open
and feed level is
too low.
Some windows are actually closed. Adjust height of feeder line until all windows
completely open and close simultaneously.
9.Windows are closed
and feed level is
too high.
Adjuster ring set too high. Adjust height. See OPERATOR’S GUIDE.
Not all windows are closed or completely
closed. Adjust height of feeder line until all windows
completely open and close simultaneously.
10.Windows are
closed and feed
level is too low.
Adjuster ring set too low. Adjust height. See OPERATOR’S GUIDE.
Feeder line not winched up high enough. Winch up feeder line higher until all pans
simultaneously are clear of the litter.
11.Hopper 1 is empty
while the feed
level in the second
hopper
corresponds with
the position of
the level switch
Birds massively move to one side of the
house, i.e. depending upon the position of
the sun. A. The problem occurs sporadically :
You can solve the problem by changing the round
hole in the Flex--Auger tube above hopper 1 into a
rectangular one. Install two outlet drops above
hopper 1 (see fig. 3.) if necessary, so that more
feed drops into hopper 1. Install the level switch
low in hopper 2 (see fig. 2.). Install and adjust
drop tubes to all hoppers high enough.
B. The problem occurs regularly :
Install a level switch high in each hopper. Install
the level switch low in the last hopper. Install and
adjust the drop tube high, so that the feed in tube
A (over switch level) is carried to hopper 2.
Drop tube installed and
adjusted high.
Level switch installed
low.
Hopper 1
Hopper 2
FIGURE 1. FIGURE 2.
A
Hopper 2
Case a.
Large feed reserve (A) in
case b.
Hopper 1
FIGURE 3.