Roxell FLEX-AUGER FA 125, Use And Assembly Manual

Page: 121 / 178

ROXELL -
031 - 0516
FLEX- AUGER - INSTALLATION INSTRUCTIONS
III- 23
TRANSPORT LINE LOCATION
SINGLE ROW OF FEEDING TROUGHS
- in a feeding trough : against the
back wall.
- in 100kg hopper : in the center.
Install the drop tube.
FIGURE 26.
Suspend the line in the cen-
ter.
DOUBLE ROW OF FEEDING TROUGHS
Max. 45
º
pellets
Max. 30 º meal
DISTANCE BETWEEN SUSPENSION POINTS
Recommendation
:
SUSPEND ALL
Flex-Auger components !
Suspension in auger direction (no fixation of tube support).
Maximum tensile force of the S-hook : 60kg.
Closing the S-hook increases the resistance.
MODEL 55, 75, 90 AND 125 (NOVICOR/DENSICOR)
If distance between outlets is less than 2m , use one suspension per outlet.
For distance more than 2m : use an extra suspension in between.
For tubes without outlets: suspension every 2m.
MODEL 90 AND 125 (METAL)
One suspension per 3M.
Max load (kg) ( inclusive safety factor 3)
Material Tube Flex Auger
Flex-Auger length
Extension
boot
Power unit
1 m 2 m 3 m
NOVICOR/
DENSICOR
FA55 6 13 53 59
FA75 14 28 68 74
FA90 16 33 87 93
FA125 29 59 98 94
METAL
FA90 67 87 93
FA125 118 98 94
FIGURE 27.
2m 2m
FIGURE 28.