background image

UNIVERSAL TOASTER UTX-200L

2

P/N 1010992 Rev. K 03/15 

McDonald’s

General

This manual is produced for the Universal Toaster.

The Universal Toaster is designed to toast a variety 

of buns (crowns and heels), bagels, and muffins. Its 

unique design allows the toaster to automatically switch 

temperatures and conveyors based on the choice 

of toasting zones made by the user. The Universal 

Toaster uses a combination of contact, impingement, 

and radiant toasting technologies to provide an evenly 

toasted product. 

This manual provides the safety, installation, and  

operating procedures for the Universal Toaster. We  

recommend that this manual be read prior to installing 

and operating the unit. 

The Universal Toaster is manufactured from the finest 

materials available and assembled to Roundup’s strict 

quality standards.  This unit has been tested at the  

factory to ensure dependable trouble-free operation. 

Warranty Information

Please read the full text of the Limited Warranty in this 

manual.

If the unit arrives damaged, contact the carrier imme-

diately and file a damage claim with them.  Save all 

packing materials when filing a claim.  Freight damage 

claims are the responsibility of the purchaser and are 

not covered under warranty.
The warranty does NOT extend to:

•  Damages caused in shipment or damage as a 

result of improper use.

•  Installation of electrical service.

•  Normal maintenance as outlined in this manual.

•  Malfunction resulting from improper maintenance.

•  Damage caused by abuse or careless handling.

•  Damage from moisture into electrical components. 

•  Damage from tampering with, removal of, or  

changing any preset control or safety device.

OWNER INFORMATION

Service/Technical Assistance

If you experience any problems with the installation or 

operation of your unit, contact your Authorized Service 

Agency. 

Fill in the information below and have it handy when 

calling your Authorized Service Agency for assistance.  

The serial number is on the specification plate located 

on the rear of the unit.

Purchased From:

Date of Purchase:

Model No.:

Serial No.:

Mfg. No.:

Network ID Number:

Refer to the service agency directory packaged with 

your manual and fill in the information below:

Authorized Service Agency

Name:

Phone No.:

Address:

Use only genuine Roundup replacement parts in this 

unit.  Use of replacement parts other than those sup-

plied by the manufacturer will void the warranty. Your 

Authorized Service Agency has been factory trained 

and has a complete supply of parts for this toaster.

You may also contact the factory at 1-877-392-7854  

(North America only), or 630-784-1000 if you have  

trouble locating your nearest Authorized Service 

Agency.

IMPORTANT!  Keep these instructions for future reference.  If the unit changes  

ownership, be sure this manual accompanies the equipment.

Summary of Contents for 9210805





















Reviews: