background image

UNIVERSAL TOASTER UTX-200L

11

P/N 1010992 Rev. K 03/15 

McDonald’s

OPERATION (continued)

Viewing the Program Mode Settings

Follow these steps to view the Program Mode:

NOTE: Do NOT change these settings.

  1.  From any operation mode (Bagel Ready, Bagel 

Wait, Muffin Ready, Muffin Wait, Lunch Ready or 

Lunch Wait) open the Front Cover and press and 

hold the 

PRGM

 button for 3 seconds.

  2.  The following appears on the display:
  

Program Muffin

 (or 

Bagel

 or 

Lunch

Press Select

  3.  Press the 

SELECT

 button and use the 

NEXT

 or 

PREV

 buttons to scroll through the following cat-

egories (Refer to the 

Universal Toaster Settings

 

section for more information on these categories):

   • Speed

 

  •  Platen Mode (Default setting is Always On)

 

  •  Units (F/C) (Default setting is F)

 

  •  Platen Temp

 

  •  IR Lower %

 

  •  IR Upper %

  4.  When you reach the desired category, press the 

Select

 button 

ONCE

. This causes the value to 

blink, indicating the value is in Edit mode.

  5.  Press the 

PREV

 or 

NEXT

 button while the value 

is blinking, to change the setting.

  6.  When you are finished viewing settings, press the 

PRGM

 button or wait 10 seconds and the unit will 

return to the Operation Mode (Bagel Ready, Bagel 

Wait, Muffin Ready, Muffin Wait, Lunch Ready or 

Lunch Wait).

NOTE: The unit will exit the Program Mode after 10 

seconds of inactivity.

WARNING

Do NOT press the NEXT or PREV buttons at this 

time. This may change the default settings and 

affect the normal operation of the unit!

Universal Toaster Settings

The following tables shows the recommended settings 

for the UTX-200L Universal Toaster:

LUNCH

Setting 

Value 

Bun Thickness Compression 

Control knob

Platen Temperature

570°F (299°C)

IR Percent Upper

60%

IR Percent Lower

0%

Lunch Speed 

(22 Seconds)

5720

MUFFIN

Setting 

Value 

IR Percent Upper 

80%

IR Percent Lower

50%

Muffin toasting speed  

(95 seconds).

200

BAGEL

Setting 

Value 

IR Percent Upper 

80%

IR Percent Lower

50%

Bagel toasting speed 

(55 seconds)

340

NOTE: It is recommended that these settings 

remain unchanged.

The Bagel and Muffin Program use the following three 

settings:

• Speed
•  IR Lower%
•  IR Upper %

The Lunch Program uses the following four settings:

• Speed
•  Platen Temp
•  IR Lower %
•  IR Upper %

  4.  Test one or two buns to verify that the product is 

toasting with the desired quality.

   5.  If the toasting quality needs further adjustment, 

repeat Steps 2 through 4 as necessary.

  6.  Press the 

PRGM

 button when the adjustment is 

complete to return to Ready mode.

NOTE: This setting is maintained when the unit is 

powered off.  

  7.  Press the 

PRGM

 button to exit.

Summary of Contents for 9210805





















Reviews: