background image

UNIVERSAL TOASTER UTX-200L

9

P/N 1010992 Rev. K 03/15 

McDonald’s

Product Labels and Toasting Product

The UTX-200L can toast Bagels, Muffins, Bun Crowns, 

and Bun Heels, but not all products are inserted into the 

toaster the same way. 

Product Labels are placed on the toaster to illustrate 

where and how specific products should be inserted for 

proper toasting. 

If the 

Product 

Label reads:

Then insert the product as follows:

Heel

Insert Heel with the cut side 

facing

 

the Platen. Refer to the appropriate 

Product Label

Crown

Insert Crown with the cut side 

facing

 

the Platen. Refer to the appropriate 

Product Label

Muffin

Insert the Muffin into the Breakfast 

Chute with the cut side face 

UP

.

Bagel

Insert the Bagel into the Breakfast 

Chute with the cut side face 

UP

.

Items 1, 2, and 3 in this section show how to insert 

product and product toasting routes.

NOTE: Always toast some test product at the start 

of each day or whenever the unit mode is changed 

to ensure proper toasting operation.

OPERATION (continued)

SELECT

SELECT

Crowns

Heels

Bagels OR 

Muffins

Insert Heels on the left side of the toaster only. Insert 

Crowns on the right side only.

Cut Side of  

Muffin Or Bagel 

(Facing up)

Cut Side of  

Heel and Crown 

(Facing forward)

TOASTING MUFFINS OR BAGELS

TOASTING CROWNS AND HEELS

1

2

3

IMPORTANT

The unit can toast 4 bagels or muffins across 

at a time. However, bagels and muffins should 

NOT be placed in the unit together. Use the 

Muffin Bagel Selector buttons to enter the 

appropriate mode for bagels or muffins.

NOTE: For all UTX-200 units, the product pass-

through time is 22 seconds (+/- 2 seconds).

Summary of Contents for 9210805





















Reviews: