background image

UNIVERSAL TOASTER UTX-200L

7

P/N 1010992 Rev. K 03/15 

McDonald’s

Operating Instructions

NOTE: To ensure proper operation, toast some test 

product at the start of each day or whenever the 

unit mode is changed.
NOTE: The UTX-200L has three operational modes: 

Bagel and Muffin (breakfast) and Lunch (crowns 

and heels). The unit always starts up in Muffin 

Mode. 

OPERATION

SELECT

 

SELECT

 

NOTE: If the toasting quality needs adjustment, 

refer to 

Adjusting Toasting Quality 

in the Operation 

section of this manual.

Testing 20

#####, #####, #####

PRGM

MOTOR

PLTN

UT

I/R

NEXT

PREV

SELECT

BREAKFAST/LUNCH

ADJUST

Antunes UTX-200

#####, #####, #####

PRGM

MOTOR

PLTN

UT

I/R

NEXT

PREV

SELECT

BREAKFAST/LUNCH

ADJUST

The unit displays 

this message for 

approximately 2 

seconds.

The unit performs 

a 20 second 

system check.

The bottom line

refers to the 

current software 

version

The bottom line

refers to the 

current software 

version

SELECT

SELECT

Power ON

Turn the Power Switch On.  

The unit “clicks” three times. This is normal.

The unit start up mode includes a 20-second system check.

Muffin Wait

PRGM

MOTOR

PLTN

UT

I/R

NEXT

PREV

SELECT

BREAKFAST/LUNCH

ADJUST

Muffin Ready

PRGM

MOTOR

PLTN

UT

I/R

NEXT

PREV

SELECT

BREAKFAST/LUNCH

ADJUST

The unit displays the 

Muffin Ready

 message when it 

reaches proper operating temperature for Breakfast.

After the system check, the unit displays the  

Muffin Wait

 

message. The 

Muffin Wait

 message means the unit is 

warming up. This stage lasts approximately 20 minutes.

1

Press one of the Muffin/Bagel Selector buttons to switch 

between Muffin and Bagel mode.

Switching Between Muffin and Bagel Mode

2

3

4

1

Summary of Contents for 9210805





















Reviews: