© Rototilt Group AB
2018-06-28
2017-07-04
2200002
Rototilt®
6679
SE - Bruksanvisning i original
_SE
2017-10-13
_6800
2200212
Control System - ICS
SE - Bruksanvisning i original
_SE
ECU =
Excavator
Control
Unit
Refer to Basemachine´s “Instructions for Use” and/or
“Schematics” to locate ECU in question.
EN
English
Machine control
Machine control regulates the oil flow to
the hydraulic circuit for extra equipment
on the base machine. Movement of
the rollers in the handles affects the oil
flow in the machine's main valve via the
control unit.
The system has two different functions:
Rototilt® control
When the 8-pole connector on the stick is
connected, a flow is regulated parallel to
the valves on Rototilt ® and the hydraulic
flow is adjusted to this.
The flow runs in one direction only.
Regulation of extra hydraulics
When the base machine is run without
Rototilt ®, the control can be used to
regulate the oil flow in the machine circuit
for extra hydraulics.
The flow can be regulated in both
directions.
Handles
The handles are equipped with switches
and rollers to control Rototilt® and base
machine functions.
The handle functions are configured as
described on the sticker.
Also see display & Instructions for Use
!
IMPORTANT
- The base machine’s factor-installed
handles have been replaced with handles adapted
for ICS.
Carefully check the changed functions, for both the
base machine and Rototilt®.
2200441_ _0000
