© Rototilt Group AB
2018-06-25
1
3
2
English
EN
i
TIP
-
A profile can apply to a tool instead of a user.
!
IMPORTANT
- It is only possible to open the lock either
when the start menu is visible or from the troubleshooting
menu.
Operator settings
Profile
The bottom bar shows the active profile.
The profile can be changed either directly
when starting using the arrow keys or via
menu settings.
Mark the settings in the start menu,
confirm with OK.
1.
Specified values for the profile are
changed using the arrow keys.
2.
The selection is confirmed with OK.
3. Return to the start menu with the
right function key (red).
The settings that can be saved in a
profile are speed, roller direction and
position of tilt or rotation. Make the
settings under each menu and save to
the active operator profile. Profiles 1-4
are available to users of the machine/
excavator.
Quick coupler
The icon for the quick coupler is shown
in the lower list on the menus Start and
Trouble shooting.
In order to open the quick coupler, the
green function key must first be pressed
and the released.
The buzzer sounds and the lock
switch can then be regulated during a
10-second period.
Speed
Both the general speed, and the speed
of specific functions are adjusted via the
menu.
Navigate between the functions using the
vertical arrow keys.
Adjust the values of each function using
the horizontal arrow keys. Confirm the
settings with OK
General speed cannot be adjusted in
profile 0.
2200441_ _0000
