© Rototilt Group AB
2018-06-27
Pulse function
#1
#2
TILT
HOLD
0,5 sec
#2
EXTRA2
#1
Hold function
PULSE
Hold-to-Run
EN
English
Pulsating function
The ICS control system can produce a
pulsating, shaking function to spread
material out of a tilting bucket, for
example.
Press the Pulse switch, then adjust the
speed with the roller for the tilt function.
Non-variable hydraulic flow, Extra 2
The flow can be locked using the Hold
switch when the intended level is reached
with roller for Extra 2. Press and hold the
switch for 0.5 seconds.
The next time the switch is pressed for
the hold function, the function and flow
stop.
!
IMPORTANT
- The base machine’s factory-installed
handles have been replaced with handles adapted for
ICS. Carefully check the changed functions, for both the
base machine and Rototilt®.
!
IMPORTANT
-
Carefully check the relevant functions, on the display or
the handle sticker.
i
INFO
– The illustration shows a general configuration of
the handle functions. Confirm current settings via the
menu: Handle in display..
2200441_ _0000
