© Rototilt Group AB
2018-06-25
Parked position
Active
hydraulic
thumb
English
EN
Hydraulic thumb
If the base machine/excavator is
equipped with a hydraulic thumb on
the stick, the ICS system can prevent
simultaneous use of the tiltrotator and
hydraulic thumb.
The display shows the alternatives under
the Angles menu. If the text is grey
instead of black, the function cannot be
activated.
To activate this function, the tiltrotator’s
rotation position must be at the zero
position; a certain margin of error (<5°) is
allowed.
The angle of the tiltrotator in relation to
the base machine/excavator stick shall
be 0°. Perform a visual check to ensure
that this is the case.
Select the alternative and confirm with
OK.
As long as the hydraulic thumb is
activated, a warning text is shown on the
display.
Disabling the function must be done
manually. It does not shut down in
connection with system restarts or when
the base machine/excavator ignition is
turned on and off.
Before disabling the function, the
hydraulic thumb must be returned to the
parked position. Perform a visual check
to ensure that this is the case.
Turn off the function with OK.
2200441_ _0000
