1
x
Safety
5
BA ROTEX GSU - 09/2007
1.3
Danger prevention
ROTEX GasSolarUnit conforms to the state-of-the-art and meets all recognised technical requirements. However, improper use
may result in serious physical injuries or death, as well as property damage.
The ROTEX GasSolarUnit must only be installed and operated as follows to avoid danger:
– As stipulated, and in perfect conditions,
– With an awareness of safety and dangers.
This assumes the knowledge and use of the contents of this manual and training in the operation of the ROTEX GSU by the
installer.
Danger of explosion if you smell gas
Escaping gas is a direct threat to human health and safety. Even a few sparks can cause major explosions. If you smell gas, please
follow these rules:
• Do not light an open flame and do not operate electrical switches.
• Open windows and ventilate the room well.
• Inform the authorised gas supply company.
1.4
Proper use
The ROTEX GasSolarUnit may only be used as a hot water heating system. The ROTEX GasSolarUnit must be installed, connected
and operated only according to the indications in this manual.
The ROTEX GasSolarUnit may only be used with a controller approved by ROTEX (see declaration of conformity in Page 2 of this
instruction manual).
Any other use outside the above is considered as improper. The owner will be solely responsible for any resulting damage.
Proper use also includes the adherence to the maintenance and inspection conditions. Spare parts must at least satisfy the
technical requirements defined by the manufacturer. This is the case, for example, with original spare parts.
1.5
Instructions for operating safety
Heating system
• Work on the heating system (e.g. installation, connection and the initial start up) must be carried out only by authorised and
trained heating engineers.
• Switch the main switch off and secure it against unintended switching on when carrying out any work on the heating system.
• Set up the heating system as an open or closed heating system according to the safety-related requirements of EN 12828.
• The safety valves must conform to the DIN EN ISO 4126-1 and the components must be inspected. The safety valves must
be installed in the safety flow.
• The stickers on the gas condensing boilers must not be removed or damaged.
Electrical installation
• All control and safety devices in the ROTEX GasSolarUnit are connected ready to operate and checked. Modifications to the
electrical installation are dangerous and are prohibited. The owner will be solely responsible for any resulting damage.
• Work on the electrical installation should only be carried out by qualified electrical engineers observing the technical electrical
guidelines and regulations of the relevant electric power supply company.
Gas installation
• Work on the heating and gas supply system should be carried out only by authorised and trained technical personnel.
• Work on gas burners must be carried out only by authorised and trained technical personnel.
Air/flue gas system (LAS)
• The owner may not arbitrarily modify the air/ flue gas system (LAS). Modifications to the combustion air supply and the
exhaust conduction may be carried out only by authorised and trained technical personnel after approval by the Chief District
Chimney Sweep.
Summary of Contents for GSU 320
Page 45: ...x Notes 45 BA ROTEX GSU 09 2007...
Page 46: ...Notes 46 BA ROTEX GSU 09 2007...
