62
User manual
Hydrobox module AQMS80X1i
EN
PART 1. OWNER’S MANUAL
3. CARE AND MAINTENANCE
3.1. Cleaning Your Unit
BEFORE CLEANING OR MAINTENANCE
ALWAYS TURN OFF YOUR AIR CONDITIONER SYSTEM AND DISCONNECT ITS POWER SUPPLY BEFORE
CLEANING OR MAINTENANCE.
WARNING
DO NOT REMOVE OR CLEAN THE UNIT BY YOURSELF.
Removing and cleaning the unit can be dangerous. Removal and maintenance must be performed by
a certified technician.
CAUTION
Only use a soft, dry cloth to wipe the unit clean. If the unit is especially dirty, you can use a cloth soaked
in warm water to wipe it clean.
• Do not
use chemicals or chemically treated cloths to clean the unit
• Do not
use benzene, paint thinner,polishing powder or other solvents to clean the unit. They can
cause the plastic surface to crack or deform.
• Do not
use water hotter than 40°C (104°F) to clean the front panel. This can cause the panel to
deform or become discolored.
• Before cleaning the filter, close the water pipe externally connected to the hydraulic module, drain the
water, unscrew the Y-type filter, and pull out the filter.
• Some metal edges and evaporator fins are sharp and improper operation may cause injury, so be
careful when cleaning these parts.
• The maximum water pressure is 3 bar,but the best pressure range is between 1 to 2 bar. It will be
perfect, if the water pressure is the same as pre-pressure of expansion vessel.
NOTE:
The hydraulic module has no separate sewage outlet.
CAUTION
• Any maintenance and cleaning of outdoor unit should be performed by an authorized dealer or a
licensed service provider.
• Any unit repairs should be performed by an authorized dealer or a licensed service provider
3.2. Maintenance
In order to ensure optimal availability of the unit, a number of checks and inspections on the unit and the field
wiring have to be carried out at regular intervals.
